110V T890 BGA IRDA WELDER INFRARED HEATING REWORK STATION

Brand New

T890 BGA IRDA Welder Infrared Heating Rework Station

Attention : Only 110V Available Now

2 YEAR FACTORY WARRANTY

LOWER PRICE, HIGHER QUALITY

It can reflow any laptop video chip,XBOX360,motherboards ,PSP PS2 ,video card, mobile phone ,cell phone

☺This machine has the strong and perfect function selection, with eight temperature waves in the memory software.
☺Technician focused infrared heat is easy to target most component removal/replacement and re-work.
☺Friendly human-machine operation interface, perfect LCD display.
☺The Workstation has a 320 X 330 mm a 1200W controlled Pre-heating System.
Integrated and adjustable Infrared (IR) eye protection.
☺PID intelligent temperature control can avoid the IC damage due to the fast or uninterrupted warming up.
☺Can suitable for the entire component, especially Micro BGA component.
☺Three-dimensional adjustable lamp body, use laser light, suitable for unsoldering any-angle components.
☺Training is illustrated in factory provided video.
☺Ergonomic design, practical and easily operated.
☺Unlike Air Re-Work systems, The T-890 uses an Infrared source and optics to target heat to individual components without dislodging other SMT parts by way of eddies air currents.
　

Features:
1.  This machine has the strong and perfect function selection, with eight temperature waves in the memory software, you can select the right temperature wave according to the solder/unsolder request.
2.  Intelligent temperature wave heating, can achieve the solder/unsolder automatically.
3. Three-dimensional adjustable lamp body, use laser light, suitable for unsoldering any-angle components.
4.  PID intelligent temperature control can avoid the IC damage due to the fast or uninterrupted warming up.
5.  This machine has a super hot melt system, use infrared welding technology which is developed independently, heat is easy to pierce and distribute evenly, can suit for a variety of computer, notebook, play station’s BGA components, especially in a Northbridge/ Southbridge chipset of computer.
6.  Friendly human-machine operation interface, perfect LCD display, you can watch the whole repairing process very clearly.
7.  Ergonomic design, practical and easily operated. Good build quality but at the same time light weight and a small footprint allows the T-890 to be easily bench positioned, transported or stored.
　

Technical parameters :
Complete machine power : 1500W
Rated voltage and frequency : AC 110V 60Hz ( if you want 220V, pleaes donot bid, sorry for any inconvenience caused. )
Infrared lamp body power : 300 W
Preheating chassis power : 1200 W
Working bench size : 320 X 330 mm
Infrared lamp body heating size :  60 X 60 mm
Preheating chassis preheating size : 245 X 260 mm
Preheating chassis temperature range :  0 ℃-350 ℃
Size : 316mm X 410mm X 290mm
Net weight : 9.3 kg

What includ the package ?

1× Welding table main body

1× Infrared lamp body

2× Portal frame

1× Power line

1× User manual(Compact disc)

How to use :

1. Examination and operation:
1). Place this machine on an even surface with good ventilation and no combustible items nearby. Leave at least 20mm on either side because the machine will emit heat when in use. Check the power supply voltage, connect the machine with the power supply, assemble the temp-sensor and infrared lamp, turn on the power switch, the LCD screen will display as follows:

2) Press “F1” button (about 2 seconds) the preheating chassis starts to work, press “F1” button again to stop.
3) Press “F2” button (about 2 seconds) the infrared lamp starts to work, press “F2” button again to stop.

2. The wave selection and setting
1). Press “F3” button enters to the select/set page, firstly, set the preheating chassis preheat temperature (e.g. set the preheating temperature 113 degree), press “F3/F4” buttons up and down to select different temperature, press “F1” button to save. When hear the tick- tock, it is saved successfully, the LCD screen displays as follows:

2). Press “F2” button enters to the select/set page, the LCD screen displays as follows:

3). Press “F2” button enters to the select/set page, following we provide eight different wave cycles, please choose one according to your request, press “F1” to confirm the wave you choose, press “F3” button, come to the Main Manu page.
4). Press “F2” button, the lamp starts heating up according to the setting temperature.

5). When the process finished, return the previous page automatic. If you want to stop in the process, press “F2” button.

3. The wave selection and setting
1). Press “F3” button enters to the select/set page, firstly, set the preheating chassis preheat temperature (e.g. set the preheating temperature 113 degree), press “F3/F4” buttons up and down to select different temperature, press “F1” button to save. When save succeed, the LCD screen displays as follows:

2). Press “F2” button enters to the select/set page, the LCD screen displays as follows:
　

3). Press “F2” button enters to the select/set page, following we provide eight different wave cycles, please choose one according to your request.

4). If you want to reset the wave, press “F4” to select the point you want to reset, press “F5” button, when it flicker the grid, you can set. Press “F3/F4” buttons up and down to select different temperature, press “F1/F2” buttons forward and backward to select different time, press “F5” button to save.(the grid disappear, change to the previous flicker status), press “F4” button come to next segment, the same method to set the wave, press “F1” button to save the current wave, press “F3” back to the main operation page, the wave setting completed.

5). Press “F2” button, the lamp starts heating up according to the setting temperature.
　

Each temperature wave purposes as follows:

Wave one: use the same with soldering the less lead paste, like 85Sn/15Pb 70Sn/30Pb

Wave two: use the same with unsoldering the less lead paste, 85Sn/15Pb 70Sn/30Pb

Wave three: use the same with soldering the more lead paste, like 63Sn/37Pb 60Sn/40Pb

Wave four: use the same with unsoldering the more lead paste, like 63Sn/37Pb 60Sn/40Pb

Wave five: use the same with soldering high-melting-point lead-free paste, like Sn/Ag3.5；Sn/Cu.75 Sn/Ag4.0/Cu.5 Sn95.5/Ag3.8/Cu0.7

Wave six: use the same with unsoldering high-melting-point lead-free paste, like Sn/Ag3.5；Sn/Cu.75 Sn/Ag4.0/Cu.5 Sn95.5/Ag3.8/Cu0.7

Wave seven: use the same with soldering lead-free solder in melting point, like Sn/Ag2.5/Cu.8/Sb.5；Sn/Bi3.0/Ag3.0

Wave eight: use the same with unsoldering lead-free solder in melting point, like Sn/Ag2.5/Cu.8/Sb.5；Sn/Bi3.0/Ag3.0

We also have the relevant part, not included in this list. If you need, please contact us

A: 0.3mm leaded solder ball,250000PCS

B: 0.4mm leaded solder ball,250000PCS

C: 0.5mm leaded solder ball,250000PCS

D: 0.6mm leaded solder ball,250000PCS

E: 0.76mm leaded solder ball,250000PCS
  Solder ball feature:

   1.Solder ball alloy content: SN63PB37 (Sn 63% Pb 37%)

   2.Melting point: 183 degrees Celsius.
F: genuine and original U.S. AMTECH solder paste ,100g

G: genuine and original U.S. AMTECH solder paste ,10cc

H: foil paper