Your cart is empty

NEW DIAMOND MICRODERMABRASION DERMABRASION PEEL BEAUTY SPA MACHI

NEW DIAMOND MICRODERMABRASION DERMABRASION PEEL BEAUTY SPA MACHI
Move your mouse over image or click to enlarge
$169.00
Add to Cart:

  • Model: WD-60
  • 98 Units in Stock

Designed by
                        ZHONGKUI.ORG
Recommend
TOMTOP

TOMTOP

TOMTOP

TOMTOP

TOMTOP

 

Navigation:








>> PDA A88 P198
 
Brand New

Portable Diamond Dermabrasion Unit

Diamond Microdermabrasion Dermabrasion Beauty Machine

PROFESSIONAL MICRODERMABRASION MACHINE

Diamond Dermabrasion

COME WITH DIAMOND DERMABRASION TIPS WANDS COTTON FILTERS SET

Easy Operation

CE Certification, FDA ,ISO9001 Quality Certification

2 YEARS WARRANTY

 
 
3 stainless steel wands which are used with 9 interchangeable diamond tips
 
Note :
1. The higher the D number, the finer the grit
2. Clean diamond tips with Alcohol, then sterillze them with UV light or high Temperature
3. Replace the cotton filter inside the diamond tip or gas nipple after 5-6 customers treatment
 
>> Introduction

The Micro-crystal Dermabrasion was designed by Italian Florence's Mattioli at first, until now had over 20 years’ history.

This kind of technology only supplies to the dermatology expert and doctor at first uses, but more and more SPA House & Beauty Saloon also gradually uses, it was called the best method of medical beauty.

This method successfully has developed in Europe for several years, cures patient thousands of examples, and has obtained the extremely satisfactory effect.

Now we want to introduce the Diamond Dermabrasion, it is a creative improvement of the Micro-crystal Dermabrasion.

The Diamond Dermabrasion provided a non-surgical skin refinish procedure, by using sterile diamond heads to abrade or rub off the top skin layer, then Vacuuming out the particles along with any dirt and dead skin back up.

This procedure removes skin debris, imperfections, blemishes, wrinkles and unwanted pigmentation on the skin. Moderate usage of Diamond Dermabrasion, accompany with skin products that penetrate through top skin layer that reach the dermis level, helps to replenish natural nutrients, restore cell activity, and promote skin health.

The results after Micro Dermabrasion treatment is usually a healthy, glowing, beautiful skin.

 

Preparation before treatment

1. A consultation included the examination of the skin, a plan for treatment.

2. Operator should wear vinyl gloves and a facemask.

3. On oily or acne skin, a steamer may be used prior to the treatment, or a degreasing lotion may be applied prior to the cleanser.

4. Cleansing the skin with Cleansing gel or water, then wipe off with cotton pad. Allow the skin to dry.

>> Specifications

Operating Instruction for Diamond Dermabrasion

 

1. Push in the movable ring of copper nozzle at the hand piece, and pull out the 6x4 size vacuum hose. Then push in the black plastic ring on the vacuum hose.

2. Put a drop of cream or milk lotion on the vacuum hose nozzle, push in the movable ring and insert in the vacuum hose to the limit.

3. Insert a cotton swab into the Diamond Head, then tight up the Diamond Head on the hand piece. Remove the cotton swab after every treatment.

4. Turn on the power switch.

5. Adjust the Vacuum intensity by Vacuum Regulator according to the following reference table, the intensity displays on Vacuum gauge and check with the client for comfort.

Recommended Vacuum intensity on treatment area

 

Treatment Area

Normal Skin (inHg)

Sensitive Skin (inHg)

Face

12-22

8-12

Forehead

12-22

10-12

Chest

15-20

15-18

Nose

10-15

10-14

Neck

18-18

10-15

Near Eye Area

8-12

8-10

 

Treatment Schedule Table

 

Treatment

Frequency (days)

Total Visits

Face Peeling

6-10

3-5

Fine Lines

7-13

6-8

Neck

12-14

3-5

Acne Scars

7-12

8-10

Hyperpigmentation

7-12

8-10

 

6 Use the incline area of Hand piece to contact with the skin surface. Proceed with a slow sliding motion. Do not place the hand piece at one spot for too long, doing so will cause harm to the skin.

7. Adjust the crystal flow rate by the Vacuum Regulator slowly from minimum to maximum. For commonly use, do not set the flow rate to maximum unless it is of necessity. This is for better

comfort intensity.

8. Gently stretch the skin with thumb and finger and glide the Hand-piece 2 to 3 times over the area being treated. Then cross again in different directions to prevent streaking lines as in the reference picture. Brush strokes or polishing motions may be used in different sites.

 

DIAGRAM OF SUGGESTED MOVEMENTS

AND AREAS FOR DERMABRASION

 

DIAGRAM OF SUGGESTED MOVEMENTS AND AREAS FOR DERMABRASION

*Please follow direction of arrows.

 

Please follow direction of arrows.

9. After treatment, brush off all remaining dead skin with a soft brush and rinse with damp sponges or damp cool towel.

10. Allow skin to dry then apply desired skin product.

11. To clean the Diamond Head, use toothbrush or cotton swab damped with a little alcohol to wipe off the dirty impurity, and then use UV light or high temperature for sterilization.

 

>> Safety Warning

Add to Cart: